SAFETY HARNESS BELT HIGH COMFORT LIGHT Product description The YT-74218 safety harness with the waist belt can be used both as an element of the fall protection system and for work in suspension. The harness is one of the lightest in its class, incl. thanks to the attachment points made of aluminum. Mesh material in the shoulder, hip and thigh straps as well as EVA fillings improve comfort, air circulation and close fit to the body. Properly fitted harness must fit tightly to the torso, belt and thighs so that, together with a dedicated attachment point, it can evenly distribute the forces acting on the body during a fall or to work comfortably in the suspension. Universal size two attachment points for fall arrest system compliant with EN361 one attachment point for the suspension work system compliant with EN813 two lateral attachment points for work in support according to EN358 four tool loops in the waist belt for hand tools with a maximum weight of 2 kg per loop adjustable chest, hip and thigh straps polyester textile tapes with a width of 45 mm and strength higher than 27 KN The YT-74218 safety harness with the waist belt has been tested in an EU-accredited laboratory and meets the requirements of EN 361: 2002, EN 358: 2018 and EN 813: 2008. Shoulder straps Waist belt Thigh belts Front attachment point complies with EN361 Rear hitch point complies with EN361 Lateral attachment points according to EN358 Front attachment point complies with EN813 Buckles for adjusting the size Loops for excess tape Tool loops SECURITY AND LEGAL ASPECTS Work at height is work performed at a level greater than 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If, in such conditions, it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The harness can be used for five years from its first use. Parameters Material: polyester