YT-83090
PORTABLE POWER STATION 300W, 315WH, 230V, USB-C PD
Brand
Yato
Entity responsible for this product in the EU
TOYA S.A.More
Power
300 W
Dimensions
270x150x182 mm
Storage temperature
10~30 C
Kit contents
station, mains charger, cable for charging the product from a 12V DC electrical installation, cable for charging the product from an external solar panel
Weight
3.9 kg
Efficiency
80 %
Protection class
IP20
Display type
LCD
Battery capacity
12500 mAh
Electrical insulation class
II
Flashlight function
yes
Battery voltage
25.2 V d.c.
Battery type
Li-Ion
Charger
mains 110-240V~ 50/60Hz, car 12V, charging from external solar panels
Battery energy
315 Wh
Maximum power
600 W
Output signal characteristics
pure sine
Charging temperature
0~45 C
Discharging temperature
-20 ~ +60 C
Protection
BMS: overcurrent, short circuit, over discharge / overcharge / overvoltage / overheating,
Protection cont.
inverter: undervoltage / overvoltage / short circuit / overload / overheating
Symbol
YT-83090

Portable battery power station with a capacity of 315 Wh. It will support five devices simultaneously. The built-in pure sine AC converter with a rated power of 300 W (peak power up to 600 W) will work well as an emergency power source for, among others, a pump and a central heating furnace controller, a router, a decoder or a TV. Three USB ports, including one USB-C in PD 60 W technology, will power and repeatedly charge a smartphone, tablet or laptop. The 12 V socket will successfully power a tourist fridge or dedicated lighting.

built-in power bank with 35 Li-Ion high discharge rate cells in NMC/INR technology in 18650 housing with a nominal voltage of 3.6 V and a capacity of 2500 mAh (total 87500 mAh)
capacity does not drop below 80% of the initial value even after 500 full discharge cycles
cells arranged in a solid basket with a design that provides free air access to each cell, which significantly improves cooling efficiency
advanced BMS system that monitors all current parameters and cell temperature in real time, ensuring the safety of the charging and discharging process
BMS has overcurrent, short-circuit, over-discharge, overcharge, overvoltage and overheating protection
cell balancing system extends the life of the entire pack
special USB-C port to excite the cell pack - if we leave the station discharged to 0% for a long time and the device does not respond to the connected charger, then using a 5 V power supply, 2 A we can excite the cells and restore the station and BMS to operation
The station can be charged in three ways: with a power supply with a maximum power of 72 W, a cable for the car cigarette lighter or from external photovoltaic panels
manufactured according to automotive standards
Additional information:

harmonic distortion factor (THD) at full load: 3%
working time at rated load of the device (300 W): 40 min
charging time from the power supply: ~6 h
charging time from the car cigarette lighter: ~5-6 h
charging time from photovoltaic panels: ~6 h
continuous power from the AC 230 V socket: 300 W (600 W at peak)
cigarette lighter socket: 12 V/10 A
USB-A sockets: 5 V/3.1 A
USB-C socket: 60 W in PD technology
BMS protection: overcurrent, short circuit, over-discharge, over-charge, over-voltage, overheating
inverter protection: under-voltage, over-voltage, over-heating, short circuit, overload
LED light with 3 modes, including SOS, with a power of 2 W
dimensions: 270 x 150 x 182 mm
weight: 3.9 kg
set contents: station, mains charger, cable for charging the product from a 12 V DC electrical installation, cable for charging the product from an external solar panel

Use warnings:

Caution: This product may emit hazardous optical radiation. Do not stare at the operating lamp. It may be harmful to the eyes.