The YT-74236 safety shock absorber with a rope and two carabiners is an element of the fall arrest system connecting the safety harness with the anchor point. The shock absorber is made of a properly sewn polyester tape. When arresting a fall, specially designed seams tear gradually, slowing down the speed of the fall length: 1.8 m rope diameter: 12 mm two self-closing carabiners with manual locking, maximum opening: 16 mm permanently connected to the safety rope The YT-74236 shock absorber with a rope and two carabiners has been tested in an EU-accredited laboratory and meets the requirements of EN 355: 2002. SECURITY AND LEGAL ASPECTS Work at height is work performed above 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If in such conditions it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards that the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The service life of the safety shock absorber is five years, counted from the first use. Technical data Index number YT-74236 EAN 5906083063596 Brand Yato Material polyester